VARNISH COP

INDOOR AND OUTDOOR ACRYLIC VARNISH

Description

Indoor and outdoor VARNISH COP is a clear acrylic product which leaves a bright and smooth film, an excellent protector of the surface application.

Color:

Various colours and transparent.

Presentation:

Container of 0.5, 1 or 4 litres.
- Bucket of 19 litres

Uses and applications

VARNISH COP is applied in all types of surfaces such as metal, concrete, plastic, wood, etc. Can be applied in apparent brick, artificial stone, natural stone, cement, paints, textured coatings for its good adhesion.

Surface preparation

The surface must be free of dust, humidity, loose or spoiled paint, oil and badly bonded materials to achieve an adequate adherence. If the chosen surface has another coating it must be removed immediately by mechanical or other means ensuring the removal of the anterior coating.

Product preparation

VARNISH COP can be applied by brush or with an air gun as it comes in its container or diluted from 10 to 15% in xylol.

Recommendations:

Do not leave uncovered or under the sun.
Do not mix with other products.
Work in full stretches as the job is difficult to hide.
Wash tools and equipment immediately after finishing painting with warm water and soap. Rinse with clean water.

Performance:

6 to 8 sq.m2 per litre by layer. Depends on the surface and way of application.

Presentation:

Type: Acrylic.
To touch: 40 minutes.
Fully dry: 4 hours
Finishing: Shiny finish

Precautions

Wash hands with clean water after using, avoid contact with eyes. If this happens, wash with running water for 15 minutes and see a doctor immediately.
Keep out of reach of children. .

Advisory service:

Our technical support department is at your oservice for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.

Data Sheet

Download