GLUE FLOOR PSP

PORTLAND CEMENT-BASED ADHESIVE AND POWDER RESINS

Uses and applications

- Ideal for the installation of porcelain and floors.
- Marble, ceramic tiles or granite installation on floors indoor and outdoor in high traffic areas.
- Installation on fully cured smooth concrete surfaces, mortars of cement sand, plaster panel and prefabricated cement panel.
- For residential floor installations on indoor ceramic floor with light traffic, without having to pick up or chop the previous floor, saving time, money and trouble.
- To glue all kinds of floor and tiles on the most common surfaces, leaving it free of oil, dust, grease, paint, wax or any other type of impurity.

Surface preparation

Before preparing the mix, the surface must be free of dust, humidity, loose or spoiled paint, oil and badly bonded materials to achieve an adequate adherence.

Product preparation

A. Empty into a container 4.5 litres of clean water per sack of 20 kg.
B. Empty PSP (FLOOR ON FLOOR) into the container.
C. Mix evenly creating a pasty consistency.

Recommendations

The performance may vary depending on the trowel used, the substrate condition and the installation.

Performance

Trowel ¼’’ x ¼’’ x ¼’’ (6.35 mm) 5 - 6 sq.m.
Trowel ⅜’’ x ⅜’’ x ⅜’’ (9.50 mm) 4 - 4.5 sq.m.
Trowel ½’’ x ½’’ x ½’’ (12.7 mm) 2 - 3 sq.m.

Presentation

- Sacks of 20 kg.

Precautions

Wash hands with clean water after using, avoid contact with eyes. If this happens, wash with running water for 15 minutes and see a doctor immediately. Keep out of reach of children.

Advisory service

Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.

Data Sheet

Download