PLASTICOP 1000
- Home
- Sealants and additives
- PLASTICOP 1000
ADHERENCE PROMOTER FOR SMOOTH SURFACES
Uses and applications
PLASTICOP 1000 is a compound that, when applied on surfaces such as concrete, polystyrene or another smooth surface, creates a rough anchor profile for the correct adhesion of a finishing mortar.
PLASTICOP 1000 allows us to not chop concrete or scrape polystyrene to create a suitable surface.
Surface preparation
The surface must be free of dust, oil and badly bonded materials to achieve an adequate adherence. If the chosen surface has another coating, it must be removed using mechanical or other means to ensure the removal of the previous coating.
Product preparation
Manually stir PLASTICOP 1000 and apply by roller or brush.
Recommendations
Add without diluting, water addition causes sedimentation of the mineral charge and decreases the adhesion capacity. Let dry 4 to 8 hours before the application of the finishing mortar.
Performance
1.5 to 2 sq.m. per litre.
Presentation
Bucket of 19 litres and 4 litres.
Colour: Greenish blue
Advisory service
Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.