PLASTIBOND 500®

SEALANT AND ACRYLIC ADDITIVE

Description

PLASTIBOND 500 is a white (milky) compound formulated from acrylic styrene resins. Its adhesiveness imparts to mixtures made with this product the necessary characteristics to solve multiple problems of the construction industry.

Uses and applications

It is advisable PLASTIBOND 500 as:
1.- Adhesive
a) Between flattened.
b) Between new and old concrete.
c) Between plaster and wall.
2.- Adherent additive.
a) For concrete, flattening, mortars, etc.
b) For concrete floor preparation.
c) To reinforce paint.
3.- Sealant.
a) For porous surfaces.
b) For floors and walls.

Surface preparation

The surface must be free of dust, oil and badly bonded materials to achieve an adequate adherence. If the chosen surface has another coating, it must be removed using mechanical or other means to ensure the removal of the previous coating.

Product preparation

- As adhesive;
In concrete, Mix 4 to 5 litres of PLASTIBOND 500 per sack of cement of 50 kg, sand and water according to the desired consistency
the mixture is applied as normal mortar.
- As sealant:
PLASTIBOND 500 is diluted with 50% water or more and applied with roller or brush on a clean and dust free surface.

Performance:

As adhesive, 4 to 5 litres per sack of cement of 50 kg.
As sealant, 7 to 9 m per litre.
Presentation:
- Presentation: Container of 1 to 4 litres.
- Bucket of 19 litres
- Plastic drum of 200 litres

Precautions

In case of contact with eyes, rinse with water without scrubbing. Do not eat, drink or smoke when manipulating the material. Wash hands after
handling the product. Wear a dust mask.

Advisory service:

Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.

Data Sheet

Download