VENEZIANO®
- Home
- Acrylic coatings
- VENEZIANO®


DECORATIVE ACRYLIC BASED MARBLE-LIKE APPEARANCE COATING
Uses and applications
VENEZIANO is a protective and decorative coating for all types of indoor surfaces. VENEZIANO is hydrophobic and its smooth surface does not allow the accumulation of dust or bacteria which makes it a hygienic product.
t is recommended for kitchens, hospitals, hotels and bathroom walls (except humid areas).
Surface preparation
Prime the surface to be applied with stucco and sanded until leaving a smooth and uniform surface.
Apply acrylic sealant PLASTIBOND 500 on the surface.
Apply the first coat of VENEZIANO with a stainless steel spatula or trowel in different directions until the surface is well covered (this coat must be thin for avoiding cracks).
Let it dry for 5 hours, apply the second coat of VENEZIANO with a stainless steel spatula or trowel in different directions until the surface is well covered (this coat must be thin for avoiding cracks).
Once dry to touch, give shine by rubbing the surface with a stainless steel wedge.
Product preparation
VENEZIANO comes ready to use. Add clean water maximum 5% if necessary.
Recommendations
Indoor use only.
Performance
Approximately at 2 mm of thickness: 5 sq.m. per litre at 2 layers.
Advantages and Characteristics
- Easy to apply.
- Does not require specialised labour.
- Apply with metal trowel or stainless steel wedge.
- Neither combustible nor toxic.
Presentation
- Bucket of 19 litres and 1 gallon.
- Plastic drum of 200 litres.
Colour according to colour chart.
Precautions
Wash hands with clean water after using, avoid contact with eyes. If this happens, wash with running water for 15 minutes and see a doctor immediately. Keep out of reach of children.
Advisory service
Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.