MESH FOR HEAVY DUTY REINFORCEMENT 

Description

FIBREGLASS MESH COP® is a grid mesh coated with acrylic resins, for finishing and reinforcement of structures whose rigidity and flexibility allow it to provide greater uniformity to the places where it is applied.

Presentation:

Roll: 1 x 50 m.
Grid: 4 x 5 mm.
Weight: 130 gr/cm2.
Colour: White.

Uses and applications

For application on marble mats, borders, mouldings, EPS slab or on concrete slabs which after applying this are coated with putty, mortar or finishing paste.

Advantages

a).- Does not deteriorate with humidity
b).- Increased tension capacity
c).- Simple handling on site
d).- Increased lifetime.
e).- Excellent capacity to withstand high and low temperatures.
f).- Clean and non-polluting
g).- Excellent mechanical resistance
h).- Easy to install

Recommendations:

- Make cuts to dimensions before starting work.
- Cut with scissors or blade and avoid tearing the mesh.
- The overlap between canvases in longitudinal directions must be at least 10 cm and 20 cm transverse with respect to the direction of the roll.

Advisory service:

Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.

Data Sheet

Download