PUTTY COP WITH FIBER
- Home
- Modified mortars
- PUTTY COP WITH FIBER
CEMENT-BASED COATING
Uses and applications
Applicable on surfaces such as block, brick and walls, essential to give excellent finishes to the construction works.
Surface preparation
The surface to be covered must be absorbent (block or brick), it must be clean, free of dust, oil, paint, saltpeter, frost or any other element preventing it from its proper installation.
Product preparation
Add approximately 8 litres of clean water for each sack of 40 kg to form a thick and uniform paste. If resistance is needed, add PLASTIBOND 500 replacing the desired proportion of water. 1 part of PLASTIBOND 500 can be used for 4 parts of water, depending on the quality desired and this can be optional. Mix vigorously and the product is ready to use.
Apply using a mason spoon and flattened with a smooth trowel. If the base is too dry, it can be moistened lightly and evenly.
Recommendations
- Keep MASILLA COP WITH FIBER indoors and in a dry place, avoid humidity.
- Avoid inhalation of dust. Wear a respirator when preparing this product.
- Wash hands with clean water after use.
- Avoid contact with eyes. If this occurs, flush with running water for 15 minutes and consult a physician immediately.
- Do not leave within reach of children.
- Prepare only the amount of product to be used.
It hardens after 30 minutes due to its cementitious content.
Performance
Approximately 6 to 8 m for a sack of 40 kg, depending on the thickness applied and substrate conditions.
Presentation
Sacks of 40 kg.
Precautions
PUTTY COP WITH FIBRE must be stored in a cool and dry place. Places with humid conditions can affect the product by forming stones.
Avoid contact with water while in storage.
After 1 year of its production, it loses its properties.
Advisory service
Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.