GLUE FLOOR STANDARD
- Home
- Adhesives for tiles and floors
- GLUE FLOOR STANDARD
MULTIPURPOSE ADHESIVE FOR TILES AND FLOORS
Uses and applications
Utilise GLUE FLOOR STANDARD mixed with water on concrete or mortar substrates. Ideal for usage in tile and floor colocation, medium and high absorption, where a high performance is required at low cost.
Surface preparation
The surface must be free of dust, humidity, loose or spoiled paint, oil and badly bonded materials to achieve an adequate adherence.
Product preparation
A. Empty into a container 4.5 litres of clean water per sack of 20 kg.
B. Empty GLUE FLOOR STANDARD into the container.
C. Mix evenly creating a pasty consistency.
Recommendations
With the use of the toothed trowel, regularising the thickness of the adhesive layer is achieved and avoids leaving hollow parts between coating and adhesive paste allowing the air to be ejected which would otherwise be trapped, forming bubbles that would reduce the contact surface between the coating and the adhesive.
Performance
Trowel ¼’’ x ¼’’ x ¼’’ (6.35 mm) 5 - 6 sq.m.
Trowel ⅜’’ x ⅜’’ x ⅜’’ (9.50 mm) 4 - 4.5 sq.m.
Trowel ½’’ x ½’’ x ½’’ (12.7 mm) 2 - 3 sq.m.
Presentation
Sacks of 20 kg.
Colors:
Grey and white
Precautions
Wash hands with clean water after using, avoid contact with eyes. If this happens, wash with running water for 15 minutes and see a doctor immediately. Keep out of reach of children.
Advisory service
Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.