PORTLAND CEMENT-BASED ADHESIVE AND POWDER RESINS

Uses and applications

Utilise GLUE MARBLE mix with water on concrete or mortar substrates. Ideal for usage on marble pieces and granite, medium and low absorption, where high performance is required at low cost.

Surface preparation

Before preparing the mix, the surface must be free of dust, humidity, loose or spoiled paint, oil and badly bonded materials to achieve an adequate adherence.

Product preparation

A. Empty into a container 5 litres of clean water per sack of 20 kg.
B. Empty GLUE MARBLE into the container.
C. Mix evenly creating a pasty consistency.

Recommendations

With the use of the toothed trowel, regularising the thickness of the adhesive layer is achieved and avoids leaving hollow parts between coating and adhesive paste allowing the air to be ejected which would otherwise be trapped, forming bubbles that would reduce the contact surface between the coating and the adhesive.

Performance

Trowel ¼’’ x ¼’’ x ¼’’ (6.35 mm) 5 - 6 sq.m.
Trowel ⅜’’ x ⅜’’ x ⅜’’ (9.50 mm) 4 - 4.5 sq.m.
Trowel ½’’ x ½’’ x ½’’ (12.7 mm) 2 - 3 sq.m.

Presentation

- Sacks of 20 kg.
Color: Gray.

Precautions

Wash hands with clean water after using, avoid contact with eyes. If this happens, wash with running water for 15 minutes and see a doctor immediately. Keep out of reach of children.

Advisory service

Our technical support department is at your service for the solution of any problem within our range. The instructions given in the present sheet are based on our broad experience. The conditions under the product are managed and the methods of application are off our limits. The users must carry out tests according to their needs.

Data Sheet

Download